BV伟德

Leader in Chinese nozzles (nozzles) and jetting systems

Converter
Converter
Converter steelmaking uses molten iron, scrap steel, and ferroalloys as the main raw materials. The physical heat of the molten iron and the chemical reaction between the molten iron components generate heat to complete the steelmaking process in the converter, which will generate a large amount of iron oxide dust particles and carbon monoxide gas. It must be purified, recycled, and comprehensively used to prevent environmental pollution.

Converter steelmaking uses molten iron, scrap steel, and ferroalloys as the main raw materials. The physical heat of the molten iron and the chemical reaction between the molten iron components generate heat to complete the steelmaking process in the converter, which will generate a large amount of iron oxide dust particles and carbon monoxide gas. It must be purified, recycled, and comprehensively used to prevent environmental pollution.

1. Oxygen lance, cone oxygen lance, squeeze combined oxygen lance nozzle, casting oxygen lance nozzle

Oxygen lance, cone oxygen lance, squeeze combined oxygen lance nozzle, casting oxygen lance nozzle

Burner

Burner

3. Wet OG dust removal nozzle, dry dust removal spray gun

Wet OG dust removal nozzle, dry dust removal spray gun

4.Converter primary wet OG (Tavon) dust removal system

Converter gas recovery and purification, dust concentration in flue gas emissions is less than 50 mg / Nm3.

5. Evaporative cooling and dust removal and deep purification system of converter's primary flue gas

Converter gas recovery and purification, dust concentration in flue gas emissions is less than 30 mg / Nm3.

6.Converter secondary dry dust removal system

The secondary flue gas dedusting of the converter, the dust concentration in the flue gas emission is less than 20 mg / Nm3.

7. Three-time dry dust removal system of converter

The dust removal during the whole process of the converter, the dust concentration in the flue gas emission is lower than 20 mg / Nm3.