BV伟德

Leader in Chinese nozzles (nozzles) and jetting systems
BV伟德 > Products > Products

product
Fan nozzle
Fan nozzle
Solid cone nozzle
Solid cone nozzle
Hollow cone nozzle
Hollow conical nozzle: KZ1 nozzle has simple structure, uniform spray and convenient use; it is mainly suitable for secondary cooling of billet continuous casting machine in steel plant, and can also be used for gas cleaning, cooling water treatment, product decontamination and spraying. Wet, sea water spray, etc. KZ2 nozzle has the characteristics of misalignment of the spray center and the inlet axis. Its spray form is a cone-shaped hollow ring shape with a small atomizing particle size and is not easy to block. It is mainly used for dust removal, air humidification, product decontamination, sulfur Combustion, and other equipment requiring cooling.
Fan nozzle 3 / 8PZ11790B1
The nozzle is compact in structure, stable in performance, and uniform in atomization; its spray shape is a flat strip, which is mainly suitable for secondary cooling of square and slab continuous casting machines, and also for equipment that requires cooling.
Fan nozzle 3 / 8PZ9895B1
The nozzle is compact in structure, stable in performance, and uniform in atomization; its spray shape is a flat strip, which is mainly suitable for secondary cooling of square and slab continuous casting machines, and also for equipment that requires cooling.
Fan nozzle 3 / 8PZ11795B1
The nozzle is compact in structure, stable in performance, and uniform in atomization; its spray shape is a flat strip, which is mainly suitable for secondary cooling of square and slab continuous casting machines, and also for equipment that requires cooling.
Spiral nozzle
The spiral nozzle is a series of anti-clogging nozzles developed by our company according to the actual production process requirements. The spray area of the nozzle is composed of a series of one or several continuous concentric hollow hollow cone rings. The shapes are two types: hollow cone and solid cone.
Air atomizing nozzle HPZ3.4-110B30-660
Characteristics of air atomizing nozzle (air water atomizing nozzle): \ r \ n (1) Cooling is more uniform, water will not be locally concentrated in a small area, but it will be evenly distributed throughout the spraying surface. \ r \ n (2) The adjustment range of water volume is large. The ratio of the minimum water volume to the maximum water volume is up to 1:10 for general nozzles, 1:25 for special nozzles, and 1: 3 for water nozzles. \ r \ n (3) The diameter of the spray water droplet is small. When Rwa = 35 or less, the average body area diameter is less than 100 m, which greatly improves the cooling efficiency, so it can save 30% of water under the same cooling conditions. -50%. \ r \ n (4) Nozzles are not easy to block and have a long service life. Under the same conditions, the number of nozzles and on-site maintenance can be reduced.
2 3 1 2 3